Wiring - Siemens SIMATIC S7-1500 Manual

9 "SINAMICS V90 PN" Demo Case
9.1 Overview of the demo case

Emergency stop button for the delayed interruption of safety circuit of the two
drives. The delay can be set via an "E-Stop Delay" potentiometer.

Potentiometer P1 and P2 to specify the voltage on the analog inputs of the AI
2xU module.

Sensors on the two drive discs of the motors to detect the zero position. The
sensors to be used as measuring input are connected with the channels 0 and
1 of the TM Timer DIDQ technology module.

Toggle switch S15 to control channel 3 of the TM Timer DIDQ technology
module as further measuring sensor input.

LED between the drive discs of the two motors. The two discs are provided
with a hole through which the LED can be activated when it is covered.
With the help of the "Sync." switch, the LED can either be controlled
permanently (+24V) or via channel 4 of the TM Timer DIDQ technology module
to display the synchronism of the two drive discs.
Note The toggle switches have a switch and lock function and can be assigned via the
switches located above switch field of the ET 200SP or via the direct inputs of
the SINAMICS.
9.1.3

Wiring

The diagram below shows the standard wiring of the "SINAMICS V90 PN" demo
case on which most application examples are based.
The following information regarding the creation of a user program in interaction
with the demo case can be found in the diagram:

IP addresses of the individual components of the demo case.

PROFINET wiring of the demo case for the configuration of the topology in the
TIA Portal.

Naming of the individual components of the demo case.

Wiring of the individual monitoring and display elements of the demo case,
using the modules of the distributed I/O ET 200SP.
Note Before using the demo case with the application example, please ensure that the
"SINAMICS V90 PN" demo case is wired as displayed in the diagram below.
Pay particular attention to the wiring of the PROFINET network, to avoid
unnecessary errors when commissioning the application example.
TOs of S7-1500(T)
Entry ID: 109743134, V1.0, 05/2017
55