Table of Contents
Advertisement
Quick Links
Target Board Kit S3A3 (TB-S3A3)
Renesas Synergy™ Platform
Synergy Tools & Kits
Kits: TB-S3A3 v1.0
All information contained in these materials, including products and product specifications, represents
information on the product at the time of publication and is subject to change by Renesas Electronics
Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
through various means, including the Renesas Electronics Corp. website (http://www.renesas.com).
www.renesas.com
User's Manual
Rev.1.02 Apr 2020
Advertisement
Table of Contents
Related Manuals for Renesas Synergy S3A3
Summary of Contents for Renesas Synergy S3A3
- Page 1 All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
- Page 2 Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
- Page 3 (WEEE), CE, UL, restricted substances (ROHS), FCC, FEE, and electromagnetic compatibility regulations. Renesas or its affiliates shall in no event be liable for any loss of profit, loss of data, loss of contract, loss of business, damage to reputation or goodwill, any...
-
Page 4: Table Of Contents
User’s Manual Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Contents Overview ..........................3 Kits Contents ........................... 6 Getting Started with Embedded Application Development on TB-S3A3 ........6 TB-S3A3 Hardware Details ...................... 6 Jumpers and DIP Switch Settings ......................6 4.1.1... - Page 5 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.6.3 User Potentiometer ..........................27 5.6.4 Boot Configuration ..........................28 5.6.5 Miscellaneous Signals ......................... 29 Certifications .......................... 30 EMC/EMI Standards ..........................30 Material Selection, Waste, Recycling and Disposal Standards ............30 Safety Standards ........................... 30 Design and Manufacturing Information ..................
-
Page 6: Overview
The Target Board Kit S3A3 (TB-S3A3) is enables developers get started with initial firmware development and to evaluate the Synergy Software Package (SSP) on the S3A3 MCU Group. • Renesas Synergy™ S3A3 Microcontroller Group R7FS3A37A3A01CFB 144-pin Quad Flat Pack package ... - Page 7 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Figure 1. TB-S3A3 Top Side R12UM0016EU0102 Rev.1.02 Page 4 of 33 Apr.21.20...
- Page 8 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Figure 2. TB-S3A3 Bottom Side R12UM0016EU0102 Rev.1.02 Page 5 of 33 Apr.21.20...
-
Page 9: Kits Contents
Software Package and development tools are required to be installed on your computer. Step 1: Create My Renesas Account (if you do not have one already) You need a My Renesas account to download software, development tools, and application projects. Log in to or Sign up for a My Renesas account at www.update.renesas.com/SSO/login. - Page 10 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) • Solder may be applied to both pads to develop a bulge on each and the bulges joined by touching a soldering iron across the two pads. • A small wire may be placed across the two pads and soldered in place.
-
Page 11: Default Board Configuration
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 4.1.2 Default Board Configuration The following table describes the default settings for each jumper on the TB-S3A3 Target Board. This includes traditional pin jumpers (Jx designation) and copper jumpers (Ex designation.) The Circuit Group for each jumper is the designation found in the board schematic. Functional details for many of the listed jumpers may be found in section 5.4, Connectivity and Settings and section 5.6, Additional... -
Page 12: Hardware Layout
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Location Circuit Group Default Function Open/Closed User LED Closed Enable/Disable User LED User Potentiometer Open Enable/Disable User Potentiometer User Push-Button Closed Enable/Disable User Push-Button switch Dual Jumper. Pins 1-3 connect +3V3 to +3V3MCU. -
Page 13: Power Requirements
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.2 Power Requirements TB-S3A3 is designed for 3.3 V operation. Note that this also means that 5 V PMOD devices cannot be used together with the TB-S3A3 unless they are powered separately. - Page 14 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.2.1.3 Option 3: Test Points TP1 and TP2 TB-S3A3 can also be powered by installing a 3.3 V source across TP1 (positive input) and TP2 (negative input). Copper jumper E35 must be open to enable powering the board using these test points.
-
Page 15: Powering Up The Board
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Figure 9. 3.3 V Power Regulator Circuit 5.2.2 Powering up the Board When powered, the green LED to the right of the DEVICE USB connector (LED2) lights up. The red LED in the same LED package functions as a status indicator for the J-Link On-Board debug interface on the board. - Page 16 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Figure 12. E6 on Target Board (Top Side) Figure 13. E6 on Target Board (Bottom Side) Once the shorting traces have been removed, there are several options to measure current: • Pins can be installed that allow connection of a precision multi-meter or bench meter, or leaded current shunt to allow oscilloscope or data logger connection.
-
Page 17: Major Components
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.3 Major Components • Main MCU Renesas Synergy S3A3 MCU device, part number R7FS3A37A3A01CFB#AA0 (U1) • J-Link MCU Renesas Synergy S124 MCU device, part number R7FS124773A01CFM#AA0 (U2) • USB Connectors ... -
Page 18: Connectivity And Settings
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.4 Connectivity and Settings Throughout this section, feature configuration using copper jumpers is described. Refer to section 4.1.1, Copper Jumpers for information on using copper jumpers. 5.4.1 Device USB The DEVICE USB Micro-B connection jack connects the Main MCU to an external USB Host, FS capable, allowing communications for testing and use of the Main MCU firmware. -
Page 19: Jtag/Swd
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Table 3. DEBUG USB Connector (J11) DEBUG USB Connector TB-S3A3 Description Signal/Bus +5VDC +5V_JUSB Data- U2 USB_DM (U2-18) Data+ U2 USB_DP (U2-19) USB ID, jack internal switch, cable N.C. inserted Ground Three of the J-Link ports (P108, P109, and P300) conflict with the SPI interface, as shown in the following table. -
Page 20: Leds
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Four of the JTAG ports (P108, P109, P110 and P300) conflict with the SPI interface, as shown in the following table. Table 6. JTAG Interface Conflicts Programming Interface Conflicting Interface Port Interface... - Page 21 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Figure 15. User Switch Circuit Figure 16. User Switch (S1) on Target Board Figure 17. Reset Switch Circuit Figure 18. Reset Switch (S2) on Target Board R12UM0016EU0102 Rev.1.02 Page 18 of 33...
-
Page 22: Pmod A
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.4.6 PMOD A A 12-pin PMOD type 2A connector is provided at PMOD A. The interface is powered for 3.3 V modules only. The Main MCU acts as the SPI master, and the connected module acts as an SPI slave device. -
Page 23: User Capacitive Touch Button
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.4.8 User Capacitive Touch Button A capacitive sensor region for use as a Capacitive Touch button is provided in the board USER INPUT region. A support circuit, TSCAP, is required for proper operation of Capacitive Touch button(s) by the Main MCU. -
Page 24: Pin Headers
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Figure 21. Capacitive Touch Button on Target Board (Top side) 5.5 Pin Headers The Target Board pin headers, J1, J2, J3, and J4, provide access to all Main MCU interface signals, and to voltages for all Main MCU power ports. - Page 25 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) There are several pins in the headers that are secondary fixed function pins. These secondary fixed function pins share common pin assignments with other Target Boards having Main MCUs with the same functionality.
-
Page 26: Pin Header J1
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.5.1 Pin Header J1 Pin header J1 is a 2-column by 20-row through-hole pin header on 2.54 mm centers. Table 12. Pin Header J1 Pin Assignment 144p S3A3 Pin S3A3 Signal J1 Pins... -
Page 27: Pin Header J2
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.5.2 Pin Header J2 Pin header J2 is a 2-column by 20-row through-hole pin header on 2.54 mm centers. Table 13. Pin Header J2 Pin Assignment 144p S3A3 Pin S3A3 Signal J2 Pins... -
Page 28: Pin Header J3
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.5.3 Pin Header J3 Pin header J3 is a 2-column by 20-row through-hole pin header on 2.54 mm centers. Table 14. Pin Header J3 Pin Assignment 144p S3A3 Pin S3A3 Signal J3 Pins... -
Page 29: Pin Header J4
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.5.4 Pin Header J4 Pin header J4 is a 2-column by 20-row through-hole pin header on 2.54 mm centers. Table 15. Pin Header J4 Pin Assignment 144p S3A3 Pin S3A3 Signal J4 Pins... -
Page 30: Additional Features
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.6 Additional Features 5.6.1 Analog Reference Voltages A footprint for installation of capacitors C21 and C23 is provided on the Target Board. These two capacitors provide noise-bypass capability for ports P010/P011 and for ports P012/P013. See Figure 23 for the circuit design. -
Page 31: Boot Configuration
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Table 16. Target Board User Potentiometer Designator Function MCU Control Port MCU Pin POT1 User Potentiometer U1 P004 (AN004) U1-136 Figure 25. User Potentiometer Circuit Figure 26. User Potentiometer on Target Board (top) 5.6.4 Boot Configuration... -
Page 32: Miscellaneous Signals
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 5.6.5 Miscellaneous Signals 5.6.5.1 AVCC0/AVSS0 By default, AVCC0 is connected to +3V3 MCU and AVSS0 is connected to the system ground. To disconnect these references from the AVCC0 and AVSS0 lines, copper jumpers E10 and E11 must be open. -
Page 33: Certifications
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 6. Certifications The TB-S5D3 v1 meets the following certifications/standards. See page 3 of this user’s manual for the disclaimer and precautions. 6.1 EMC/EMI Standards • FCC Notice (Class A) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 34: Design And Manufacturing Information
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) 7. Design and Manufacturing Information The design and manufacturing information about TB-S3A3 v1 board are available in the “TB-S3A3 v1 Design Package” available on renesas.com/synergy/tb-s3a3 under the Downloads tab. • Design package file name: tb-s3a3-v1.2-designpackage.zip •... -
Page 35: Website And Support
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Website and Support Visit the following vanity URLs to learn about key elements of the Synergy Platform, download components and related documentation, and get support. TB-S3A3 Resources renesas.com/synergy/tb-s3a3 Synergy Software renesas.com/synergy/software Synergy Software Package renesas.com/synergy/ssp... -
Page 36: Revision History
Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) Revision History Description Rev. Date Page Summary 1.00 Oct.10.17 — Initial release 1.01 Dec.18.17 — Graphics replaced 1.02 Apr.21.20 — Updated sections 5.4.8, 6, and 7 R12UM0016EU0102 Rev.1.02 Page 33 of 33... - Page 37 Target Board Kit S3A3 (TB-S3A3) User’s Manual Publication Date: Apr.21.20 Published by: Renesas Electronics Corporation...
- Page 38 Renesas Synergy™ Platform Target Board Kit S3A3 (TB-S3A3) R12UM0016EU0102...