Huawei SUN2000-90KTL Series User Manual page 79

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
1.
Issue 11 (2020-08-30)
NO TE
● The screenshots in this document correspond to the SUN2000 app 3.2.00.003 (Android)
and FusionSolar app 2.5.7 (Android).
● When the WLAN connection is used, scan the QR code of the WLAN module to access
the login screen.
● When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-
WLAN module SN, and the initial password is Changeme. Use the initial password
upon first power-on and change it immediately after login. To ensure account security,
change the password periodically and keep the new password in mind. Not changing
the initial password may cause password disclosure. A password left unchanged for a
long period of time may be stolen or cracked. If a password is lost, devices cannot be
accessed. In these cases, the user is liable for any loss caused to the PV plant.
● When the Bluetooth connection is used, the connected Bluetooth device is named after
last 8 digits of the SN barcode+HWAPP.
● After you select Use by default for this USB accessory, a message that asks you to
confirm the USB access will not appear if you log in to the app again without removing
the USB data cable.
(Scenario in which the SUN2000 is connected to the FusionSolar hosting
cloud) Run the FusionSolar app and access the Device Commissioning
screen.
Figure 7-3 Selecting a connection mode (with network access)
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
71