Huawei SUN2000-90KTL Series User Manual page 36

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
●
●
●
●
●
●
Figure 4-1 Installation environment
If the equipment is installed in a public place or in an area of people activities,
such as a parking lot, station, factory building, or residential area, install a
protective net outside the equipment and erect a safety warning sign to isolate
the equipment. The purpose is to avoid personal injury or property loss caused by
contact with the equipment by nonprofessionals or other reasons during the
operation of the equipment.
Issue 11 (2020-08-30)
Do not install the SUN2000 near flammable or explosive materials.
Do not install the SUN2000 where its enclosure and heat sinks are easily
accessible, because the voltage is high and these parts are hot during
operation.
The solar inverter will be corroded in salt areas. Before installing the solar
inverter outdoors in salt areas, consult Huawei. A salt area refers to the region
within 500 meters from the coast or prone to sea breeze. The regions prone to
sea breeze vary with weather conditions (such as typhoons and monsoons) or
terrains (such as dams and hills).
Install the SUN2000 in a well-ventilated environment to dissipate heat.
When installed under direct sunlight, the power may be derated due to the
temperature rise. You are advised to install it in a sheltered place or install an
awning over it.
The SUN2000 should be physically separated from third-party wireless
communication facilities and residential environments by distance greater
than 30 m.
WARNING
Copyright © Huawei Technologies Co., Ltd.
4 Installation
28