SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
Mounting Structure Requirements
●
●
●
Figure 4-2 Mounting structure
Installation Angle Requirements
The SUN2000 can be support-mounted or wall-mounted. The installation angle
requirements are as follows:
●
●
Issue 11 (2020-08-30)
The mounting structure where the SUN2000 is installed must be fire resistant.
Do not install the SUN2000 on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight load.
In residential areas, do not install the SUN2000 on drywalls or walls made of
similar materials with a weak sound insulation performance because the
noise generated by the SUN2000 is noticeable.
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
Do not install the SUN2000 at forward tilted, excessive back tilted, side tilted,
horizontal, or upside down positions.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
29