Powering On The Sun2000 - Huawei SUN2000-90KTL Series User Manual

SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual

6.2 Powering On the SUN2000

Precautions
● Before turning on the AC switch between the SUN2000 and the power grid, use
● If the solar inverter has not been running for more than half a year after being
Procedure
Step 1 Turn on the AC switch between the SUN2000 and the power grid.
If you perform
shutdown. You can start the SUN2000 only after the fault is automatically
rectified.
Step 2 Turn on the DC switches at the bottom of the SUN2000.
Step 3 Perform quick settings on the SUN2000 app. For details, see
Interactions.
----End
Issue 11 (2020-08-30)
NO TICE
a multimeter set to the AC position to check that the AC voltage is within the
specified range.
mounted, it must be checked and tested by professionals before being put into
operation.
NO TICE
Step 2 before
NO TE
For the SUN2000-90KTL-H2, remove the screw from a DC switch before turning on the DC
switch. Keep the screw properly for future use after the SUN2000 is powered off.
Copyright © Huawei Technologies Co., Ltd.
Step 1, the SUN2000 reports a fault about abnormal
6 Commissioning
7 Man-Machine
67