Data Logging - Seametrics Multi-Parameter Smart Sensor Instructions Manual

Smart sensor and datalogger

Table of Contents

MULTI - PARAMETER INSTR

INSTALLATION AND OPERATION

Data Logging

Select Set Up Logging from the sensor screen. If there are no files currently on the sensor

you'll see the Set Up Logging button active under the Data Files tab as well as in the upper

menu. Once files have been started/logged on the sensor they will be displayed under the

Data Files tab.

Set Up Logging Window

Here you will name your data file and set up the recording interval and duration of

each logging phase. Select your desired recording interval and duration for each phase,

Aqua4Plus 2.0 will display the available memory at the bottom of the window.

Seametrics • 253.872.0284

Page 8

seametrics.com

Table of Contents

Do you have a question about the Multi-Parameter Smart Sensor and is the answer not in the manual?