BenQ AQ COLOR SW Series User Manual page 55

Item
Calibration
1
Calibration
2
Calibration
3
(selected
model only)
Custom 1
Custom 2
CAD / CAM
(selected
model only)
Animation
(selected
model only)
Adjusts the balance between light and dark shades.
Brightness
Adjusts the degree of difference between darkness and
Contrast
lightness.
Adjusts the clarity and visibility of the edges of the subjects in
Sharpness
the image.
Color Temp. 5000K
6500K
9300K
Custom
User
Define
Function
Applies the calibration result optimized by the
provided calibration software named
and your colorimeter
Master Element
(purchased separately). Visit the website for
software download and more information
(Palette Master Element How-to-Use Guide).
See
Appendix: Advanced software on page
Applies a combination of color settings defined
by users.
Enhances the contrast if a CAD / CAM
software is used.
Enhances the contrast of the dark shades so
you could work on the details easily when
making an animation.
Applies a color tint (cool or warm) to the
image. Color temperature is measured in K
(Kelvin) degrees. The display becomes reddish
if the color temperature is low, and becomes
bluish if the color temperature is high.
Some color gradations may not be displayed well if
this the setting has been adjusted.
Allows to adjust color temperature by 100K.
The blend of the Red, Green and Blue primary
colors can be altered to change the color tint
of the image. Go to the succeeding
(green), and (blue) menus to change the
G B
settings.
Decreasing one or more of the colors will
reduce their respective influence on the color
tint of the image. (e.g. if you reduce the Blue
level the image will gradually take on a
yellowish tint. If you reduce Green, the image
will become a magenta tint.)
Range
Palette
73.
0 ~ 10
0 to 100
0 to 100
0 to 10
5000K ~
9300K
• (0~100)
R
• (0~100)
G
(red),
R
• (0~100)
B
Navigating the main menu 55