BenQ AQ COLOR SW Series User Manual page 27

7. If you intend to calibrate the display's color
by a colorimeter, slide to open the cover on
the top plate so the colorimeter can be
installed.
Follow the instruction manuals of the colorimeter you
purchased and the provided software (e.g.,
) to complete the installation and calibration
Element
process.
Portrait installation
SW270C came with shading hood for landscape installation only.
Plates required for portrait installation:
1. Prepare for the shading hood installation.
Place the monitor upright on its stand on a flat even
surface. Make sure the monitor is rotated to the
portrait mode as instructed in
page 31.
Follow the illustrations to complete the installation
carefully.
2. Install the right hoods.
Align the arrow on plate (R1) with the one on plate (R2)
and attach them together. Slide plate (R2) to the end as
illustrated.
Align the arrow on plate (Rt) with the one on plate (R1)
and attach them together. Slide plate (R1) along with
plate (R2) to the end as illustrated.
Palette Master
L2
L1
Lt
Rotating the monitor on
R2
R1
Rt
top plate
R1
R2
How to assemble your monitor hardware
Rt
27