Advertisement
2
e ink cartridges, and remove them from the
Gently shake th
packaging.
3
Remove only the yellow tape from each ink cartridge.
Caution:
Do not touch the areas shown above. Doing so may
prevent normal operation and printing.
4
Insert the cartridge in the holder for each color. Press each
cartridge down until it clicks. Make sure all cartridges are
pushed down into place.
5
Lower the scanner unit.
6
WF-3820: Follow the on-screen instructions to start
charging the ink.
WF-4820/WF-4830: Ink charging begins automatically.
Ink charging takes approximately 5 minutes. When you
see a completion message on the product's LCD screen,
charging is complete.
Caution:
Don't turn off the printer or raise the scanner unit while
the printer is charging or you'll waste ink.
Note:
As part of setup, your product's serial number will be sent
to a secure Epson server so that you can be eligible to participate
in programs we may offer from time to time, including the Epson
ink replenishment program. You will have a separate opportunity
to consent to participating in such programs.
7
Follow the on-screen instructions to select paper settings.
4
Load paper
See the online User's Guide for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the ADF.
1
Make sure the product is done charging the ink, and then
lower the control panel, lift the output tray, and pull out the
paper cassette.
2
Slide the side edge guides all the way out and set the
front edge guide to the paper size you are using.
3
Insert paper with the glossy or printable side down.
Note:
Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.
4
Slide the edge guides against the paper, but not too
tightly.
5
Keep the cassette flat as you insert it all the way, then
lower the output tray.
Advertisement
