Interacoustics Callisto AC440 Instructions For Use Manual page 58

The hardware indication picture indicates whether the hardware is connected.
When opening the Suite the system will search for the hardware. If it does not detect the hardware
then the system will automatically continue in simulation mode.
D-0101246-M – 2020/05
Callisto™ - Instructions for Use - US
Measurement details: In this table the curve
details can always be viewed. This way the
professional always has an overview of what is
being measured. Read information such as Input
Level, Max SPL, Curve Type, Stimulus, and Curve
type.
A Curve Comment for each curve can be typed
into the comment section on the right hand side.
Select a curve using the curve tag boxes under
Curve display options and write a comment in the
comment section.
The comment will then appear in the comment
section whenever the curve is selected.
Curve Display Options are found in the lower
right hand corner.
If you have measured more curves of the same
type (e.g. Frequency response curves), they will
be listed by their input level. Tick the ones that are
to be displayed on the graph.
Page 54