Gazer CM6507-100S User Manual page 14

Selection of radio band
ENG
Press the BAND button to switch between the FM and AM bands.
Manual Tuning
During the manual tuning, the frequency is changed in steps. Press the
Auto-tuning
Hold the or
To stop searching, repeat the pressing or press any other button in the radio.
Note. When a station is found, the searching stops and the station found is heard.
Auto-searching
In such a search, only stations with a high level of signal will be detected and stored.
To start searching, press the
To stop searching, repeat the pressing or press any other button in the radio.
Note. After auto-searching, the previously stored stations will be restored.
Manual Tuning
1. When the required station is detected, press
2. Press any cell to store the current station.
3. Press the arrow in the upper left corner to return to the main page of the radio.
14
button for more than 2 seconds to automatically search by frequencies lower/higher.
button on the lower bar.
Radio
or buttons to tune frequencies lower/higher.
to show the list of selected stations.