Pre-Operation Check; Cleaning And Storage - Yamaha Speed EPAC PW45 Original Instructions Manual

82 - English

PRE-OPERATION CHECK

Be sure to perform the inspection before riding the bicycle.
If there is anything you do not understand or find difficult, please consult a bicycle dealer.
• If you confirm there is a fault, have your bicycle inspected at a dealer as soon as possi-
ble.
• The power assist mechanism consists of precision parts. Do not disassemble it.
Along with performing the regular inspection before riding the bicycle, also perform the fol-
lowing inspections.
No. Inspection item
1 Residual battery capacity
2 Installation status of the battery pack
3 Operation of the e-Bike Systems
4 Display unit
Inspection contents
Is enough capacity left in the battery?
Is it properly installed?
Do the e-Bike Systems operate when you
begin moving?
Is the display mounted correctly?
31

CLEANING AND STORAGE

Do not use high-pressure washers or steam jet clean-
ers since they can cause water seepage, resulting in
property damage or malfunction of the Drive Unit or
display unit or battery pack. Should water get inside
one of these units, have an authorized dealer inspect
your bicycle.
Caring for the battery pack
Use a moist, tightly-wrung towel to wipe off dirt on the bat-
tery case. Do not pour water directly on the battery pack,
such as with a hose.
Do not clean the contacts by polishing them with a file
or using a wire, etc. Doing so could result in a fault.
Storage
Store the system in a place that is:
• Flat and stable
• Well ventilated and free from moisture
• Sheltered from the elements and from direct sunlight
32
English - 83