Table of Contents
Advertisement
Installation of BSHPS (Fabius Tiro)
Left Mounted COSY BSHPS Wall Mounted
Installation
4. On a left mounted COSY, route the power cable
for the heater below and behind the power
supply and then up to the rear of the COSY arm
(1 in
Figure
10). Extra cable can be coiled
around the clamp. Push the cable into the cable
management cavity on the bottom of the COSY
arm (1 in
Figure
11).
5. Plug the connector at the end of the cable into
the mating connector on the rear, underside of
the COSY (2 in
Figure
so that the red mark on the connector plug aligns
with the red mark on the receptacle.
12
11). Orient the connector
Figure 10. BSHPS Installation on Wall Mounted Machine
(Left Mount COSY) 1
Figure 11. BSHPS Installation on Wall Mounted Machine
(Left Mount COSY) 2
1
2
1
Fabius GS/Tiro Supplement
Advertisement
Table of Contents
