Setting Up The Analyzer From The Disk - HP E2444A User Manual

Setting Up the
Analyzer from
the Disk
HP E2444A
80386DX/DXL Preprocessor Interface
The logic analyzer can be configured for 80386DX/DXL analysis by
loading the appropriate configuration file. Loading this file will also
load an inverse assembler file (IA386 or IA386E). To load the
configuration file and inverse assembler:
1. Install the flexible disk in the front disk drive of the logic
analyzer. (The HP 16500B mainframe has a hard disk drive. You
can create a directory on the hard drive and copy the files from
the flexible disk into the directory. For step two, select "Hard
Disk.")
2. Select one of the following menus:
•
For the HP 1650-series logic analyzers, select the I/O Disk
Operations menu;
•
For the HP 16500-series and HP 1660-series logic analyzers,
select the System Front Disk menu.
3. Configure the menu to "Load" the analyzer configuration from
disk.
4. For HP 16500-series and HP 1660-series logic analyzers, select
the appropriate module (such as "100/500 MHz LA" or
"Analyzer") for the load.
5. Use the knob to select the appropriate configuration file (see
table 1-1).
6. Execute the load operation to load the file into the logic analyzer.
Setting Up the HP E2444A
1-11