Servicing; Dimensions - HP E2444A User Manual

Servicing

Dimensions

General Information
3-10
The repair strategy for the HP E2444A is board replacement.
However, table 3-2 lists some mechanical parts that may be replaced if
they are damaged or lost. Contact your nearest Hewlett-Packard
Sales/Service Office for further information on servicing the board.
Exchange assemblies are available when a repairable assembly is
returned to Hewlett-Packard. These assemblies have been set up on
the "Exchange Assembly" program. This allows you to exchange a
faulty assembly with one that has been repaired, calibrated, and
performance verified by the factory. The cost is significantly less than
that of a new assembly.
Table 3-2. Replaceable Parts
HP Part Number
E2444-69501
E2444-68702
1200-1605 *
1252-3743
* The Pin Protector IC socket is also available from McKenzie Technology, part
number PGA-132H004B1-1414R.
Figure 3-3 lists the dimensions for the HP E2444A circuit board. The
dimensions are listed in inches and millimeters.
Description
Exchange Board/Cable Assembly
Software Disk Pouch
Pin Protector
Jumper
80386DX/DXL Preprocessor Interface
HP E2444A