Step-By-Step Installation Guide; Placement Of The Mounting Plate; Removing The Microwave Oven From The Carton/Removing The Mounting Plate; Finding The Wall Studs - Hisense HMO173SR Installation Instructions Manual

1. PLACEMENT OF THE MOUNTING PLATE

A .
REMOVING THE MICROWAVE OVEN FROM THE CARTON/
REMOVI NG THE MOUNTING PLATE
1.
Open the carton and remove the upper foam
from the box , but remember to keep the
accessories.
2.
Pull the oven out of the carton and remove the plastic bag carefully.
3.
Take the mounting bracket out from the upper foam.
B .
FINGING THE WALL STUDS
1.
Find the wall studs, using one of the
following methods;
A. Wall stud finder-a magnetic device which
locates nails.
OR
B. Use a hammer to tap lightly across the mounting surface to find a solid sound.This will
indicate a wall stud location.
2.
After locating the stud(s), find the center by probing the wall with a small nail to find the edges of
the wall stud. Then place a mark halfway between the edges.The center of any adjacent wall studs
should be 16" or 24" from this mark.
3.
Draw a line down the center of the wall studs.
THE MICROWAVE MUST BE CONNECTED TO AT LEAST ONE WALL STUD.
8

Step-by-step installation guide

the upper foam
oven
carton
Wall Studs
Wall Studs Center
plastic
bag