Table of Contents
Advertisement
Environment
Installation instructions
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in at
an official collection point for recycling. By doing this,
you help to preserve the environment.
1. Make sure all the packing materials are removed from the
inside of the door.
2. Inspect the oven after unpacking for any visual damage
such
as:
•
Misaligned Door
•
Damaged Door
•
Dents or Holes in Door Window and Screen
•
Dents in Cavity
3. If any of the above are visible, DO NOT use the oven.
4. This Microwave Oven weighs app.17,5 kg and must be
placed on a horizontal surface strong enough to support
this weight.
5. The oven must be placed away from high temperature
and
steam.
6. DO NOT place anything on top of the oven.
7. DO NOT remove the turn - table drive shaft.
8. As with any appliance, close supervision is necessary
when
used by children.
9. Make sure that the AC outlet is easily accessible so that
the
plug can be removed quickly in an emergency. Otherwise,
it
should be possible to disconnect the device using a
switch from the circuit. In this case, the existing provisions
of the electrical safety standards are considered. The
product has to be correctly installed on earthed socket
with a single-phase AC (230 V/50 Hz).
WARNING! THIS APPLIANCE MUST BE EARTHED!
10. This oven requires 1.4 kVA for its input. A consultation
with a service engineer is suggested when installing the
oven.
CAUTION: This oven is protected internally by a 250 V,10
Amp Fuse.
12
Advertisement
Table of Contents
