Tools You Will Need; Mounting Space - Hisense HMO173SR Installation Instructions Manual

TOOLS YOU WILL NEED

#1 and #2 Phillips
screwdrivers
Tin snips
(to cut damper, if
needed)
Gloves
Saw
(saber, hole,
or keyhole)

MOUNTING SPACE

66" or more from the floor
to the top of the
microwave
NOTES :
•
The space between the cabinets must be 30" wide and free of obstructions.
•
If the space between the cabinets is greater than 30",you'll need filler material to fill the gap between the microwave
•
oven and the cabinets. This microwave oven is for installation over ranges up to 36" wide.
•
If you are going to vent your microwave oven to the outside, see Hood Exhaust Section for exhaust duct preparation.
•
When installing the microwave oven beneath smooth, flat cabinets, be careful to follow the instruction for power
cord clearance. Make sure that you leave enough space for the power cord clearance.
General information
Pencil
Scissors
(to cut template, if
needed)
Safety goggles
16-½ "
2"
Ruler or tape
measure
straight edge
Electric drill with 3/16", 1/2", and
5/8" bits
Duct and masking tape
Level
Bottom e dge of cabinet needs to be
30" or more from the cooking
surface
30"min.
Back splash
Carpenter square
(optional)
Filler blocks or scrap
wood pieces(for top
cabinet spacing in
recessed bottom cabinet
installations, if needed)
Edge-to-edge stud finder
or Hammer(optional)
7