11. Maintenance
Sequence of the maintenance work on the button trap:
Remove strainer insert
Clean strainer insert
Clean additional round sieve
Reinsert sieve cartridge
Attention: Never work without a strainer insert - the pump could
Attention: Perform maintenance only when the machine has been
Then insert the lint filter basket and make sure that it seats firmly in place
Clean the cover seal
Firmly close the cover of the common maintenance opening
11.5.2 Additional Lint Filter
Check the additional filter daily:
Open the cover on the airshaft
Remove the filter, suction it off, or, alternatively, clean it with a brush (wash if needed).
Replace the additional filter.
Close the cover
69
be damaged by foreign bodies!
turned off and after the drying has finished.
11.
M21-M26-M30