Accessories - Bose Acoustimass 6 Owner's Manual

Accessories

Add-on connector: PN189830 (shown)
Adapts other speaker cable for use
with Acoustimass
Extension cable: PN187092-1 (black), PN187092-2 (white)
50' (15 m) ribbon with five pairs of wire
Floor stands: UFS-20B (black), UFS-20W (white)
Wall brackets: UB-20B (black), UB-20W (white)
Note: Both UFS-20 floor stands and UB-20 wall brackets fit
Acoustimass-6 cube speakers. However, before attaching a
stand or a bracket, it is necessary to change the orientation
of the cable connector. Turn the connector upside down
before inserting it into the terminal on the back of the cube
speaker. When it is correctly attached for use with a floor
stand or bracket, the cable will run up rather than down
from the cube speaker.
For more information, or to purchase accessories, contact
your authorized Bose ® dealer. Or, to call Bose directly, refer to the Bose Customer Service
telephone numbers listed on the inside back cover.
AM189815_04_V.pdf
®
-6 speakers
December 20, 2001
Product Information
Figure 15
Add-on connector for use with
speaker wire
Figure 16
Cable
Cable connector properly
attached to cube speaker for use
with bracket or stand
17