Check The Connections - Bose Acoustimass 6 Owner's Manual

Setting Up

Check the connections

Check all connections from the receiver to the Acoustimass
cube speakers, making sure the two speakers with black terminals are connected as front
speakers (Figure 11). Check to be sure all speakers are connected to the proper terminals
according to their position in your room (Figure 12).
At the receiver, make sure the wires are connected in phase (+ to + and – to –). Incorrect
wiring can result in a total loss of Acoustimass module output.
Be sure to correct any wiring problems before you plug your receiver in and turn it on.
R
FRONT SPEAKERS
R L
12
C
SURROUND SPEAKERS
L REAR R CENTER
RS LS
®
module and the module to the
L
L
LEFT
L
December 20, 2001
Figure 11
Black connector and terminal
marked L/R on both the front left
and front right speakers
L/R
Figure 12
Completed connections
OUTPUTS
TO CUBE SPEAKERS
C R LS RS
CENTER RIGHT LEFT RIGHT
SURROUND SURROUND
INPUTS
FROM RECEIVER OR AMPLIFIER
C R LS RS
CAUTION:
Do not allow exposed wires to
brush against each other; this
could damage your receiver.
AM189815_04_V.pdf