TP-Link TL-SG105 Mounting Manual page 2

1.1 Which switches are wall mountable?
At present, the switches below are wall mountable:
TL-SG105, TL-SG108, TL-SG116, TL-SG105S, TL-SG108S, TL-SG1005D, TL-SG1008D,
TL-SF1016D, TL-SF1024M, TL-SG1005P, TL-SF1005P, TL-SG105E, TL-SG108E, TL-
SG116E, TL-SG108PE.
1.2 What tools should be prepared for wall mounting?
Before mounting the switch, please prepare the tools below:
Two #4 or #6 screws.
»
»
A screw driver.
»
»
1.3 What is the distance between the two mounting holes and
the size of the supported screws?
The distances varies form switch models, but they all support the same size of screws.
The information is shown as below:
Model
TL-SG105/TL-SG105E/
TL-SG105S/TL-SG1005P/
TL-SF1005P
TL-SG108/TL-SG108E/
TL-SG108S/TL-SG108PE
TL-SG1005D
TL-SG1008D
TL-SF1016D
TL-SF1024M
TL-SG116/TL-SG116E
1.4 What is the procedure of wall mounting?
On the bottom of the panel, there are two mounting holes. You need to drive two screws
into the wall, then mount the switch on the wall.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks
must be as same as that between the two mounting holes of the switch.
3) Drive the screws into the wall at the marks using the screw driver.
4) Mount the switch on the wall.
Distance between
the mounting holes
52mm
110mm
60mm
100mm
157.2mm
178mm
200mm
Radius of the
mounting hole
4mm
4mm
4mm
4mm
4mm
4mm
4mm
Supported
Screws
#4, #6
#4, #6
#4, #6
#4, #6
#4, #6
#4, #6
#4, #6