TP-Link TL-SG1005LP Installation Manual

Installation Guide
5-Port Gigabit Desktop PoE Switch
Note: For simplicity, we will take TL-SG1005P for example throughout this Guide.
Connection
PoE Ports (1-4)
IP Camera
PoE Devices
AP IP Phone
LED Explanation
Power
On: Power on
Off: Power off
Power
PoE MAX
TL-SG1005LP
On: 33 W ≤ Total power supply < 40 W
PoE Max
Flashing: Total power supply ≥ 40 W
Off: Total power supply < 33 W
DC Power Adapter
Ethernet Ports (1-5)
LAN Port
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SG1005LP can supply up to 30 W for each PoE port and 40 W for
all PoE ports.
3. TL-SG1005P can supply up to 30 W for each PoE port and 65 W for all
PoE ports.
Link/Act and PoE Status
On (Green): Connected to a 1000 Mbps
device
On (Yellow): Connected to a 10/100 Mbps
device
Flashing: Transmitting/receiving data
Off: No device is connected to the
corresponding port.
On: Providing PoE power
Flashing: Current-overload/Short-circuit
Off: Not providing PoE power
TL-SG1005P
On: 58 W ≤ Total power supply < 65 W
Flashing: Total power supply ≥ 65 W
Off: Total power supply < 58W
AC Power Cord
Internet
Router
WAN Port