Camera Power - Basler Ace User Manual

AW00123401000
5.6

Camera Power

Power must be supplied to the camera via the USB 3.0 cable plugged into the camera's USB 3.0
Micro-B port.
NOTICE
Voltage outside of the specified range can cause damage.
You must supply camera power that complies with the Universal Serial Bus 3.0 specification.
The camera's nominal operating voltage is +5 VDC, effective at the camera's connector.
Power consumption is as shown in the specification tables in
Basler ace USB 3.0
Physical Interface
Section 1 of this manual.
31