Emission Control Label - Isuzu 4BG1 Instruction Manual

EMISSION CONTROL LABEL: ENGINE LABEL (FOR EPA)
Emission control label is attached on the upper side of cylinder head cover. But the same emission control
label is attached at a visible point on the equipment when the label that is attached to the engine is not
visible due to the structure of the equipment.
The following is the sample of a label required for engine emission control information, along with location.
ISlJaJ
IMPORTANT ENGINE INFORMATION
ISUZU MOTORS LTD. MADE IN JAPAN
ENGINE FAMILY: XXXXXXXXXXX
ENGINE CODE: XXXX
MODEL : XXXX
ENGINE DISPLACEMENT : XXXXcm3
EXHAUST EMISSION
:XXX IN3
CONTROL SYSTEM : EM
DATE OF ENGINE
ENGINE SPECIFICATION
ADVERTISED MAX.POWER.
SAE NET
(FAN DISENGAGED)
XXkW/XXXX min-1
XXHP/XXXX RPM
FUEL RATE
XX mmht.
MANUFACTURE :xX/xx
THIS ENGINE IS CERTIFIED TO
V4LNVf IASH (COLD)
: X.X mm.
OPERATE ON DIESEL FUEL.
EXH : X.X mm.
THIS ENGINE CONFORMS TO U.S. EPA
INITIAL INJECTION
TIMING :
XX" BTDC
REGULATIONS APPLICABLE TO 1999
CURB IDLE : XXXmin-l/RPM
MODEL YEAR LARGE NONROAD
(*MODEL SPECIFICATION
COMPRESSION-IGNITION ENGINES.
SEE SERVICE MANUAL)
P.NO. X-XXXXX-XXX-X