7: Qos Configuration (502 And 602 Only); Overview; Qos Setup - XiNCOM Twin WAN XC-DPG402 User Manual

7: QoS Configuration (502 and 602 ONLY)

Overview

The Link Balancer pr vides QoS which supports the high quality of network service. o
Because it will cla ssi fy
real-time applicatio ns to get better response or performance.

QoS Setup

The following web pa e management are guiding you how to setup QoS and make QoS work g
Data – QoS Setup.
Qo F S eature
•
•
IP TOS ( Type
of Service)
Feature
•
Page 52
outgoing packets based on some policies defined by users, make som
Figure 32: QoS Setup
Enable QoS – This will allow users enable QoS function.
Queuing Method – The methods that how you manage your queue." Priority
queuing". It is one of the first queuing variations to be wildly implemented.
Process TOS Field –An
contain values indicating how each packet should be handled in the network.
If you choose "enable" then it will enable this function to process IP Type of
Service field.
Overwrite policy priority – Choose "yes" to set the priority of TOS field in IP
packet overwrite the priority defined in policy configuration
8 bits field in the IP packet header designed to
e