Load Balance - XiNCOM Twin WAN XC-DPG402 User Manual

Load Balance

This screen is only operational if using Internet connections on both WAN ports.
These settings are only functional if using both WAN ports. If using both WAN ports, these settings
determine the proportion of traffic sent over each port.
Settings – Load Balance
•
Load Balance
Configuration
•
•
Click the "Update" button to save your changes.
Figure 10: Load Balance
Enable – Use this to enable your Load Balance settings. Unless this is
checked, the other settings on this screen have no effect.
Balance Type – Select the desired option:
•
Bytes rx+tx – Traffic is measured by Bytes received and transmitted.
•
Packets rx+tx – Traffic is measured by Packets received and transmitted.
•
Sessions established – Traffic is measured by Sessions established on
each WAN port.
Loading Share on WAN 1 – Enter the percentage (%) of traffic to be sent
over WAN 1. If one WAN port connection has greater bandwidth than the
other, the one with the greater bandwidth should be given a higher percentage
of traffic than the other.
XiNCOM Corp.
Page 23