XiNCOM Twin WAN XC-DPG402 User Manual page 13

7. Enter admin for the "User Name" and leave the "Password" blank.
•
The "User Name" is always admin
•
You can and should set a password, using the following Admin Password screen.
No Response?
•
Is your PC using a Fixed IP address?
If so, you must configure your PC to use an IP address within the range 192.168.1.2 to
192.168.1.254, with a Network Mask of 255.255.255.0. See Appendix B – Windows
TCP/IP Setup for details.
•
Check that the XC-DPG Twin WAN Router is properly installed, LAN connection is
OK, and it is powered ON.
8. After the login, you will then see the Admin Password screen, as shown below.
Assign a password by entering it in the "Password" and "Verify Fields.
Figure 5: Home Screen (Admin Password) XC-DPG502 shown
XiNCOM Corp.
Page 11