Xerox DocuMate 510 Installation Manual page 81

Scanning
76
14. Make sure to designate separate folders as the Storage
Locations for the new configurations.
You will now have multiple configurations set up for the
Transfer to Storage destination, and each configuration scans
documents to separate folders.
Scan to multiple storage folders:
1. Load the documents into the scanner that you want to scan to
multiple storage folders.
2. Open the One Touch Properties window.
3. Click the arrows to get to the button you've set up for archiving
documents. In the example above it's Button 7.
4. Select one of the configurations you created for storage.
5. Click OK. The One Touch Properties window closes.
6. Now click the button on the One Touch Button Panel.
The documents are scanned to the folder specified for the
configuration.
7. When scanning is finished, put the next set of documents into
the scanner.
8. Open the One Touch Properties window again and select the
other configuration you created for storage.
9. Click OK. The One Touch Properties window closes.
10. Now click the button again on the One Touch Button Panel.
When scanning is finished, the documents are stored in the two
separate folders.
The new configurations
apply to the Transfer to
Storage Destination
Application.
DocuMate 510 Scanner User's Guide