Xerox DocuMate 510 Installation Manual page 8

DocuMate 510 Scanner User's Guide
Document Cover—Protects the document from light and
contamination during scanning.
Document Pad—Helps to secure the document in place on the
scanner glass.
Reference Frame—Place items face down within this frame.
Markings on the border of the frame show where to align various
paper sizes.
Glass—Place items face down aligned at the upper left corner of
the glass.
Paper Stop—Holds items in place as they are ejected from the
Automatic Document Feeder. Adjust the Paper Stop for letter-sized
or legal-sized pages.
Paper Guide—Holds pages in place. Adjust to fit the size of the
paper to scan.
Paper Guide Extension—Unfolds to support various page
lengths.
Automatic Document Feeder (ADF)—Feeds a stack of pages
onto the glass for scanning. The ADF can hold up to 50 pages at a
time.
Lock—Locks or unlocks the scanning head; located on the
underside of the scanner.
Status Lights—Shows the scanner's status.
Blinking Green Ready light: scanner is preparing itself or the
lamp is warming up.
Steady Green Ready light: the scanner is on and ready to
scan.
Blinking Check light: the hardware is not ready to scan.
See "Error Light Troubleshooting Codes" on page 118 for
additional details about the Status Lights.
USB Port—Connects the scanner to the computer.
ADF Port—Connects the ADF cable from the Automatic Document
Feeder to the scanner.
Power Jack—Connects the power cord to the scanner.
Power On/Off Switch—Turns the scanner's power on and off.
ADF Cable—Connects the ADF to the scanner body. The cable
provides power to the ADF and must be plugged in for it to operate.
Welcome
3