Fiber-Optic Cable And Connector Description; Cable Specification; Connector Specification; Cable Length Specification - GE VMIACC-5595 Series Installation Manual

Fiber-Optic Cable and Connector Description

The VMIACC-5595 is available with a multimode or single-mode fiber-optic interface.
Figure 1-7 below is an illustration of the 'LC' type multimode or single-mode
fiber-optic connector.

Cable Specification:

• Simplex, multimode, graded index glass fiber
• Core diameter = 62.5 ±3μm
• Cladding diameter = 125 ±2μm
• Jacket outer diameter = 3.0mm ±.1mm
• Attenuation: 4.0 dB/km (max) at 850nm, 1.75dB/km (max) at 1300nm
• Bandwidth: 160 to 300 MHz-Km (min) at 850nm, 300 to 700 MHz-km (min) at
• UL type OFNR, CSA type OFN FT4

Connector Specification:

• Compatible with NTT LC standard and JIS C 5973 complaint
• Ceramic ferrule
• Insertion loss: 0.35 dB (max) multimode
• Fiber clad diameter: 125μm
• Jacket diameter: 3.0mm
• Temperature range: -20 °C to +85 °C

Cable Length Specification:

• Multimode maximum cable length is 300 meters using 50μm core multi-mode
• Single-mode maximum cable length is 10 kilometers using 9μm core
0.49
(1.25)

Figure 1-7 'LC' Type Multimode Fiber-Optic Cable Connector

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1300nm
fiber-optic cables.
single-mode fiber-optic cables.
0.84 (21.23)
Dimensions: inches (mm)

Fiber-Optic Cable and Connector Description

(2.9mm)
1
23