Table of Contents
Advertisement
6. Turn on the VMIACC-5595, and then the following window appears.
7. Enter the Logon (user name) and password. The Logon is "admin" and the
factory default password is "password" without the quotes.
To change the setup, enter the number for that setting.
8. Type a zero (0) to show the current status of the VMIACC-5595. See Figure 1-18
on page 34.
NOTE: Login name for the serial interface is "Admin". The factory default password
is "Password" and is shared by both serial interface and the GUI. The User can change
the password.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 1-17 Control Utility Logon Window
Operational Software Description
1
33
Advertisement
Table of Contents
