20. Loosen capscrews (Item 1) and remove nut (Item 2)
with washer. Separate P.T.O. cover (Item 3) or P.T.O.
and O–ring from transaxle case. Inspect P.T.O. cover for
cracks or damage and replace if necessary.
21. Remove oil cap (Item 1) and O–ring from transaxle
case if necessary.
22. Remove air breather (Item 2) if necessary.
23. Loosen capscrews (Item 1) and remove upper cover
(Item 2) from transaxle case.
Workman 3000/4000 Series
1
2
1
Page 6 – 27
2
3
1
Figure 54
2
Figure 55
Figure 56
Drive Train