Notes - Siemens SIMEAS P 7KG7550 Operating Instructions Manual

1.20.4

Notes

•
The selection of the measured quantity depends on the
selected input voltage and current connections.
•
If the number selected is too large, "Overflow" is displayed
and the input value is automatically set to the maximum value.
•
If the power supply voltage is switched off during
programming, the message illustrated below appears when
the device is restarted. Therefore, the power supply voltage
should only be switched off in level 1 (measuring screens).
Message
Select "No" via the
existed prior to the loss of power supply voltage.
Choose "Yes" by pressing the "ENTER" button to restore the default
settings.
buttons to retain the settings as they
Power Meter
Caution: Faulty Settings!
Reset?
No
(Arrow)
43
Yes
(Enter)