Table of Contents
Advertisement
Harmony Gateway Basic User Manual
SYSTEM TAB
In order for the Gateway Basic to communicate with other HARMONY devices on a particular network, a
system needs to be created. During this step, the HARMONY devices that are communicating are added in.
During the system setup, the schedule number that is to be used per device is to be added in during the
creation of the system.
From the Beacon Flasher section, click the Add button. This will enable the section to be active allowing you to
enter the details for a HARMONY device.
Type a user defined name for the HARMONY device in the Name field.
Select the Schedule Number that is to be associated with the HARMONY device being entered.
21
Advertisement
Table of Contents
Need help?
Do you have a question about the Harmony Series and is the answer not in the manual?