Installing Controlpak; Technical Specifications For Installing Controlpak - Encom Harmony Series User Manual

INSTALLING
CONTROLPAK™
Before you can configure your Harmony Gateway
Basic radio, you must first have the radio
connected to your computer and ControlPAK™ must
be installed on the same computer.
You can download the most recent version of
ControlPAK™ from our website at:
https://www.encomwireless.com
Ensure you are using ControlPAK™ version 5.4.2 or
higher.
TECHNICAL SPECIFICATIONS
FOR INSTALLING
CONTROLPAK™
Minimum requirements for installing ControlPAK™
on your PC:
• Windows XP or Windows Vista
• 1GB RAM
• 100 MB free hard drive space
• Microsoft .NET framework 2.0
After downloading the latest version of the
ControlPAK™ software:
1. Click Setup
The ControlPAK™ Install screen appears.
2. Click Next.
The ControlPAK™ Software License Agreement
screen appears.
3. Click I agree, and then click Next.
The Upgrade/Uninstall screen appears.
4. Click Next.
The Select Directory screen appears.
5. Enter the directory in which you would
like the ControlPAK™ software to install or
click Next to accept the default directory.
The Start Copying Files screen appears.
6. Click Next.
The Setup file copies the appropriate
files to your computer, and then
registers the software.
7. Click Next, then click Finish.
The ControlPAK™ icon then appears on
your desktop.
At this point, ControlPAK™ has been successfully
installed.
11
Harmony Gateway Basic User Manual