Battery And Charger - KTS-Electronic GPA 500 XS Manual

Ground penetrating analyzer
Table of Contents

Advertisement

4.3 Battery and charger

The electronic unit is powered by two external
2900mAh Li-Ion batteries, which
charged each within 90 minutes. (Please note: Do
not exceed the charging time of 90 minutes). The
operating time of the unit depends on the type and
size of the search coil and type of headphones. It
varies between 4 to 6 hours. The charging process
is indicated by a red glowing LED on the power
adapter. The LED changes to green when the
battery is fully charged. Disconnect the adapter
after charging is finished.
An included inverter allows for charging in the car.
 The external battery pack is connected to the electronic unit via included
cable. The battery pack can be attached to your belt loop or somewhere
similar.
KTS-Electronic GmbH & Co. KG – GPA 500 XS
gets fully
Fig.: 20 - Batterypack incl. wire and clip
Fig.: 18 - Power adapter for electronic unit
Fig.: 19 - Power Inverter
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2020

Table of Contents