Search Methods; Gpa Search Methods; Search With The Universal Probe; Gold Id-Xl Search Methods - KTS-Electronic GPA 500 XS Manual

4 Search methods

4.1 GPA search methods

There must be a probe connected to the electronic unit to use the GPA search
method.

4.1.1 Search with the universal probe

 Switching the electronic unit on via On-/Off-button.
 Select your language.
 Select "GPA System" as search method.
 The electronic unit should face up while using the probe
 Optionally the tablet computer can be connected to the electronic unit via
Bluetooth. (See 5.2)
 Place the universal probe so that one of the square ends shows in the
direction you want to search and check both, calibration value and sensor
value..
 Turn the probe 180° so that the opposite square now face forward and check
the two values again.
Choose the side with values closer to 2,5 as forward direction (as shown in the
following figures).
 The distance between the probe and ground should not vary a lot.
 Avoid hectic movements and try to walk in straight lines.
Fig.: 14 - Universal probe

4.2 GOLD ID-XL search methods

There must be a coil connected to the electronic unit to use the GOLD ID-XL search
method.
KTS-Electronic GmbH & Co. KG – GPA 500 XS
Fig.: 15 - Complete universal probe
11