Settings For Kts Gpa 3D - KTS-Electronic GPA 500 XS Manual

 You can manage your saved measurements by tapping on "FILES"
 Tap on a file to display the options : "open file", "rename file", "delete file" and
"show file in 3D".
 To delete all files tap the button "DELETE ALL FILES" on the lower left part of
the screen.

5.3.3 Settings for KTS GPA 3D

 The following settings can be adjusted by tapping on "SETTINGS":
o "Number of lanes": Changes the number of lanes.
"Number of measurements": Number of measurements in one lane.
o
o "Language": Selection between German, English and French. (Note:
App will restart after selecting a language).
o "Reset Settings": Resets the device to factory settings.
o "Developer Settings": Please do not change the developer settings
except for "Measure-delay". Here you can change the time between two
measurements. Please note that this option will effect the speed options
"SLOW", "NORMAL" and "FAST" under "MEASURE".
KTS-Electronic GmbH & Co. KG – GPA 500 XS
Fig.: 29 - File management
20