3.2 GOLD ID-XL display
The Goldscan display has three different indications for the detectable metals
which will be displayed with different colors and ID-number on the screen.
Frequency and volume of the signal sound are variable.
The "Reset"-button is for an automatic zero balance.
The "back"-button leads you back to the search method selecting screen.
The battery status will be shown in the lower left corner of the display.
If you tick the "auto"-box a reset will be performed automatically after each
detection.
3.3 GPA display
The sensor value will be shown as a bar graph. The corresponding digits will
appear on the right hand side of the screen.
The calibration value will be shown on the left hand side of the screen.
The "back"-button leads you back to the search method selecting screen.
The battery status will be shown in the lower left corner of the display.
KTS-Electronic GmbH & Co. KG – GPA 500 XS
Fig.: 12 - GOLD ID-XL display
Fig.: 13 - GPA display
10