Kts Gpa 3D - Software; Search With Kts Gpa 3D - KTS-Electronic GPA 500 XS Manual

5.3 KTS GPA 3D - Software

5.3.1 Search with KTS GPA 3D

 Before starting the measurement the area should be divided in equal lanes
 Select "MEASURE" in the menu on the right hand side of the screen.
 Tap on the "START"-button which will appear on the lower part of the screen
and immediately start walking with the universal probe like shown in the figure
above.
 During the measuring process the values will appear in different colors on the
screen.
 After each lane the measurement will stop automatically. Tap on "START" to
continue. (The number of lanes is selectable. See 5.3.3).
 The frequency of the measurements is adjustable. The options "SLOW",
"NORMAL" and "FAST" appear on the lower hand of the screen.(Selecting
"SLOW" results in a bigger area but lower resolution and vice versa).
 For higher accuracy you should walk in a steady pace.
 Lane lengths of 5 to 10m are advantageous.
 You can pause a measurement anytime with the "STOP"-button. (Continue
with the "START"- button.).
 After the measurement is completed the image gets rendered.
 The measurement can be saved with the "SAVE"-button. Time and date will be
added automatically after you named the image.
 The measurement can be deleted with the "RESET"- button.
Hint: The Bluetooth pairing has failed if there is no "START"- button on the lower part
of the screen . (see 5.2)
KTS-Electronic GmbH & Co. KG – GPA 500 XS
Fig.: 24 - Walking direction for 3D evaluation
17