Battery And Charger - KTS-Electronic GPA 3000 DR User Manual

4.2 Battery and charger

The electronic unit is powered by an external
2900mAh Li-Ion battery, which gets fully charged
within 90 minutes. (Please note: Do not exceed the
charging time of 90 minutes). The operating time
of the unit depends on the type and size of the
search coil and type of headphones. It varies
between 4 to 6 hours. The charging process is
indicated by a red glowing LED on the power
adapter. The LED changes to green when the
battery is fully charged. Disconnect the adapter
after charging is finished.
An included inverter allows for charging in the car.
 The external battery pack is connected to the electronic unit via included
cable. The battery pack can be attached to your belt loop or somewhere
similar. It is best to attach the battery pack to the back of the electronics unit
through the Velcro fastener.
KTS-Electronic GmbH & Co. KG – GPA 3000 DR
Fig. 4.6 External Battery pack incl. wire
Fig. 4.4 Power adapter for
electronic unit
Fig. 4.5 Inverter
12