Android Software; Commissioning Of Tablet Computer - KTS-Electronic GPA 500 XS Manual

5 Android software

There is a tablet computer included in the GPA 500 XS-set for two-dimensional and
three-dimensional evaluation of your measurements which connects wirelessly via
Bluetooth with the electronic unit.

5.1 Commissioning of tablet computer

 Turn on the tablet computer by pressing and holding the left button on the
upper edge.
 Unlock the display by swiping across the screen.
 Both preinstalled programs are located right on the desktop. Simply start them
by tapping.
 The menu of each program is on the right hand side of the screen.
 Each program-window has an "info"-button on the lower right hand corner of
the screen which provides you with some information about the current
window.
 You can leave the prgram by tapping on the "QUIT"-button which is located
next to the "info"-button.
 There is a "share"-button in the upper right hand corner of the screen. Tap it to
take a screenshot which can be shared on several platforms.
 The tablet computer can be connected to the telescope rod of the universal
probe. To this end there is a mount on the telescope rod, to which the tablet
computer connects and is secured with a half turn. (see following figure)
KTS-Electronic GmbH & Co. KG – GPA 500 XS
Fig.: 21 - Tablet computer incl. mount
15