Stitcher Wire; Fuser Lubricant And Pressure Roll Wiper - Xerox DocuPrint 92C NPS Maintenance Guidance

About this guide
Contents
XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
The Xerox DocuPrint Network Printer Series, Guide to Performing
Routine Maintenance for 92C NPS, describes how to perform basic
maintenance on the Xerox DocuPrint 92C NPS.
This guide is designed for operators whose job consists of operating
each of the system components, running print jobs, solving simple
system problems, and performing basic maintenance tasks, such as
replenishing printer supplies.
Refer to the entire Xerox DocuPrint Network Printer Series for
information on other tasks required for printing with your DocuPrint
printer.
Users should have an understanding of Printer Controller operations.
Before using this guide, become familiar with its contents and
conventions.
This section lists the contents of this guide.
•
Chapter 1, "Feeder trays," provides information on how to load
feeder trays for your DocuPrint printer.
•
Chapter 2, "Output trays," describes how to unload output trays
for the DocuPrint printer.
•
Chapter 3, "Stitcher wire," provides information on how to
replace the stitcher wire spool, and on how to continue printing
when the spool is out of wire.
•
Chapter 4, "Fuser lubricant and pressure roll wiper," describes
how to refill the fuser agent reservoir, and how to replace the
pressure roll wiper.
•
Chapter 5, "Inks," describes how to add both black and color dry
ink, and how to replace the Customer Changeable Unit (CCU)
for the color dry ink.
•
Chapter 6, "Waste containers," provides information on how to
replace the developer and the dry ink waste containers.
•
Chapter 7, "Bypass transport," describes how to install and
remove the bypass transport.
•
Chapter 8, "Cleaning," provides instructions on how to clean the
various printing system components.
Introduction
vii