Xerox DocuPrint 92C NPS Maintenance Guidance page 22

STITCHER WIRE
3-2
If you continue printing the job without replacing the wire, the
documents print without being stapled. The printer status display
shows the following message:
OUT OF WIRE
Contact your key operator or your service representative when you
see this message. This should seldom happen because the
representative checks the wire supply on each service call and
replaces the spool as needed.
To continue printing without replacing the wire, press the Continue
button. The document is then printed with out being stapled.
XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE