Xerox DocuPrint 4890 IPS Maintenance Manual page 32

INKS
5-2
To add dry ink:
1. Open the printer doors and locate the dry ink area on the left
side of the printer.
Note: When you replace colored dry ink, it is not necessary to
remove the CCU from the printer.
1
1 Colored dry ink bottle
2 Black dry ink bottle
2. Spread a dropcloth on the floor under the dry ink area.
3. Pull the empty dry ink bottle toward you until it stops.
Caution: If there is still dry ink in the bottle, the ink may spill as
you move the bottle back onto its lid.
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
2