Xerox DocuPrint 4890 IPS Maintenance Manual page 15

XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
7. Load paper, following the instructions at the front of the feeder
tray and carefully positioning the paper in the right-front corner
of the tray.
8. Pull the length guide forward to touch the back of the paper
stack.
9. Latch the paper feeder assembly by pressing the green dot next
to the green release lever until the assembly clicks into position.
10. Slide the tray into the printer until it latches. The tray rises
automatically into position.
11. Press the Continue button to resume printing.
Note: If you change to larger paper after an extended run of smaller
paper, run 20 copies of a sample document to clean the fusing
system. Otherwise, the first pages of the new job may be of poor print
quality.
FEEDER TRAYS
1-5