Xerox DocuPrint 4890 IPS Maintenance Manual page 18

OUTPUT TRAYS
Unloading the dual stacker trays
2-2
To unload each dual stacker tray, raise the scuffer arm and remove
the printed pages.
2
1 Scuffer arm
2 Tray Full indicators
Note: When both trays are full, you must empty at least one tray
before you can resume printing.
Note: Your service representative can set up your printer so that
printing continues automatically after a dual stacker tray is unloaded
and replaced.
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
1