Xerox DocuPrint 4890 IPS Maintenance Manual page 29

XEROX DOCUPRINT 4850/4890 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE
FUSER LUBRICANT AND PRESSURE ROLL WIPER
9. Rotate the pressure roll while wiping the dirt off with a clean
cloth. Discard the cloth in the trash receptacle when you are
finished.
10. Insert the short rod in the upper loop of the new wiper.
11. Insert the long rod through the lower loop of the new wiper.
12. Insert the lower rod into the springs on both ends of the
pressure roll.
Caution: Make sure the smooth side of the wiper is facing the
pressure roll.
4-7